All posts by admin

02May/20

How to Fix Error 0x800ccc0d in Outlook?

FIX: Outlook error Code 0x800ccc0d in Windows

Fix Error code 0x800ccc0d? Look no further this page is your solution. Below is a clear explanation and solution regarding error 0x800ccc0d. The intention of this page is to help Outlook (Express) users who are experiencing problems like error 0x800ccc0d.
Help us make more of these useful sites. Place a link to this website on your website

Quick explanation / solution

The error 0x800ccc0d occurs in Outlook when retrieving e-mail if the POP3 mail server for incoming e-mail is incorrectly set up with the account.
The server name for the POP server is usually mail.domainname.nl or domainname.nl. Check with your email provider for the correct information.
Also note that in the case of a new web host account or in the case of a server migration, the DNS information has been updated by your ISP. If this is not yet the case, the IP number of the server can also be used instead of the server name.

Microsoft explanation / solution
Symptoms

When you try to send and receive e-mail, you receive one of the following error messages:
Cannot connect because the target computer actively refused the connection.
Cannot find the server. (Account: account name, POPserver: ‘e-mail’, Error number: 0x800ccc0d)
An error occurred at task ‘server name – Send and receive’ (0x800ccc0f): ‘The connection to the server has been interrupted. If the problem persists, contact the server administrator or Internet service provider (ISP). The server’s response was:? K ‘
The server terminated the connection unexpectedly. Potential causes are issues with the server, organize issues or too long latency. Record. account name, Server: ‘server name’, Protocol: POP3, Server Response: ‘+ OK’, Port: 110, Secure (SSL): N0, Error Number: 0x800ccc0f
At task ‘SMTP server name – Send and receive’ an error occurred (0x80042109): ‘Outlook cannot connect to the SMTP server for outgoing e-mail. In the event that you keep on accepting this message, it would be ideal if you contact your server overseer or Internet specialist organization. ”
Operation timed out before receiving a response from the POP server for incoming messages 0x8004210a
A timeout occurred while communicating with the server 0x800ccc19
You may also receive an error message with one or more of the following error codes:
0x800ccc15
0x80042108
0x800ccc0e
0x8004210b
0x800CCC0B
0x800CCC79
0x800ccc67
Cause
These error messages appear if Microsoft Outlook or Microsoft Outlook Express cannot connect to your e-mail server. In many cases, these error messages are caused by one of the following:
Incorrect account settings
Incorrect configuration of personal firewall software
Antivirus software
A damaged modem
The MTU (Maximum Transmission Unit) size
Outlook Express has been removed from the computer or the installation of the program is damaged
Your user profile in Outlook is damaged
The POP3 server contains a damaged e-mail item
Workaround
Depending on the situation, do one of the following to work around this problem.

Method 1: Verify that the email server settings are correct

If you are looking for information about the correct settings for your e-mail server, contact your Internet service provider or your system administrator.

Note Some ISPs do not allow message routing through another SMTP server while connected to their network. In this case, replace the SMTP server for the other ISP or the other email account with the SMTP server of the ISP that you use to access the Internet.
If you see that your account settings have been changed to ‘Localhost’ in the POP (Post Office Protocol) server settings and to ‘account name / POP server name’ in the Account name box on the Server tab and you are using the Trend Micro PC antivirus software cillin, disable the POP3 Scan (Pop3trap.exe) feature of the Trend PC-cillin software. To do this, proceed as follows:
1. In the system tray on the taskbar, double-click the PC-cillin icon.
2. Clear the Enable POP3 Scan check box.
3. Reconfigure your POP3 email account in Outlook with the correct settings.
You may also need to disable the options PC-cillin Web-Filter, Web Security and Enable POP3 Scan.

Method 2: Check the configuration of the firewall software

Configure the firewall software to allow the following files to access the Internet:
For Outlook Express: Msimn.exe
For Outlook: Outlook.exe
By default, most email clients require outbound access through port 110 and inbound access through port 25. For more information about the ports that communicate with the e-mail server, contact your Internet service provider or system administrator.

This problem is caused, among other things, by firewall software from the following suppliers:
McAfee
Symantec
ZoneLabs
Cisco
Cygate
Sonicwall
Freedom Security Zero Knowledge
McAfee Personal Firewall
Check the configuration settings in the McAfee Personal Firewall program and ensure that Microsoft Outlook or Microsoft Outlook Express has full access.

For more information about McAfee Personal Firewall configuration, visit the following McAfee website:
http://www.mcafee.nl
You can also uninstall and reinstall the McAfee Personal Firewall program. A program signature file is then recreated and used by the firewall. It also ensures that both Outlook and Outlook Express are included in the list of programs that have Internet access.
Norton Personal Firewall (Symantec)
If you are using Symantec Norton Personal Firewall 2002, Norton Internet Security, or Norton SystemWorks, uninstall the Norton Personal Firewall or Norton Internet Security software. After that resolves the issue, reinstall the Norton software.

Method 3: Visit the website of your antivirus software vendor for additional suggestions

If your antivirus software has an email scanning feature, you must change the configuration so that Outlook or Outlook Express can be used with this feature.

This problem is caused, among other things, by antivirus software from the following suppliers:

Symantec (Norton)
McAfee
Trend Micro (PC-cillin)
Panda

For more information, visit the following websites:

Symantec:
http://www.symantec.com/region/nl/techsupp/
McAfee:
http://nl.mcafee.com/root/support.asp?cid=9045
Trend Micro:
http://kb.trendmicro.com/solutions/default.asp?cType=3&prodID=0&versionID=0
Panda:
http://www.pandasoftware.com/support/default.aspx

Microsoft provides this contact information to help you request technical support. This contact information is subject to change without notice. Therefore, Microsoft cannot guarantee the accuracy of this contact information.
The non-Microsoft products that are listed in this article are manufactured by manufacturers who are completely independent of Microsoft. Along these lines, Microsoft makes no guarantee, inferred or something else, with respect to the exhibition or dependability of these items.

Method 4: Check if your modem is working properly

Contact the modem vendor to determine if there are any issues or updates for the type of modem you are using.

TimeWarner RoadRunner cable service has confirmed that there is a problem with the older Toshiba cable modems.

Method 5: Check the MTU (Maximum Transmission Unit) size set for your router

Due to the MTU size set for your router, only packets up to a certain size are forwarded. Such errors usually occur when you connect to the Internet through a Linksys BEFSR41, Linksys BEFSR81 or Linksys BEFW11S4 router. These routers have MTU (Maximum Transmission Unit) problems that can cause timeout messages when you send email messages.

You can solve this problem by changing the MTU setting for your router. Information can be found in your router documentation or on the following Linksys website:
http://www.linksys.com/support/support.asp?spid=87
Microsoft provides this contact information to help you request technical support. This contact information is subject to change without notice. Therefore, Microsoft cannot guarantee the accuracy of this contact information. Note This problem can also be caused by an incorrectly configured router or an incorrectly configured device that is between the user and the email provider. Such devices are also known as ‘black hole’ routers.

For more information about how to troubleshoot black hole router problems, click the following article numbers to view the articles in the Microsoft Knowledge Base:

314825 Troubleshooting for black hole router problems
159211 Locating and repairing black hole routers
156438 Internet e-mail or newsreader software freezes or times out

Method 6: Uninstall Outlook Express and reinstall the program

If Outlook Express is removed from your computer, or if the Outlook Express installation is damaged, Outlook does not work properly and the program may generate one of the error messages that are listed in the “Symptoms” section. To resolve this problem, reinstall Outlook Express. For more information, click the following Microsoft Knowledge Base article numbers:
318378 Reinstall or repair Internet Explorer and Outlook Express in Windows XP
263837 Outlook Express: Uninstall and reinstall Outlook Express manually in Windows 2000
256219 OUTLOOK EXPRESS: Remove and reinstall Outlook Express 5 manually
To learn more about why Outlook Express is required for Outlook, click the following article number to view the article in the Microsoft Knowledge Base:
230076 Outlook 2000: The reason why Outlook Express is required for Outlook 2000

Method 7: Create a new email profile

You can solve these problems by creating a new email profile.For more information about how to create profiles in Outlook, click the following article numbers to view the articles in the Microsoft Knowledge Base:
829918 Create a new email profile in Outlook 2003
287072 Outlook 2002: Create a new email profile for Outlook
195718 Outlook 2000: (Business or Workgroup) Create a new email profile for Outlook

Method 8: Delete suspicious messages from your mailbox

If your mailbox contains a damaged message, you can do the following:
Contact your ISP to request that you delete suspicious e-mail messages.
Remove suspicious e-mail from the mailbox using the web-based e-mail program provided by your ISP.
More information
If you receive a timeout error message in conjunction with the error code, correct the server timeout setting in Outlook or Outlook Express to correct the problem. To change the timeout setting for the server, do one of the following.
Outlook 2000 (CW)
1. Start Outlook.
2. On the Tools menu, click Services.
3. Open the Services tab, select Internet E-mail, and click Properties.
4. Open the Advanced tab.
5. Increase the server timeout value incrementally until the problem is resolved.
Outlook 2000 (IMO)
1. Start Outlook.
2. Click Accounts on the Tools menu.
3. Select the desired account and click Properties.
4. Open the Advanced tab.
5. Increase the server timeout value incrementally until the problem is resolved.
Outlook 2002 and Outlook 2003
1. Start Outlook.
2. On the Tools menu, click Email Accounts.
3. Snap View or change existing email records and snap Next.
4. Snap your POP3 record and afterward click Change
5. Click More Settings.
6. Open the Advanced tab.
7. Increase the server timeout value incrementally until the problem is resolved.
Outlook Express 5.x and 6.0
1. Start Outlook Express.
2. Click Accounts on the Tools menu.
3. Open the E-mail tab.
4. Click your POP3 account and then Properties.
5. Open the Advanced tab.
6. Increase the server timeout value incrementally until the problem is resolved.

Disclaimer: No rights and / or results can be derived from the above texts. Following and / or executing the above instructions is entirely at your own risk. If you are not experienced with installing and / or repairing software / software, we recommend that you hire someone with experience.or If you need any support or technical help than call our toll free Outlook Customer service phone number +1-917-580-5618 Here You Can get a certified outlook technician can help you to fix your issues online.

02May/20

How to Fix Error Code 0x800ccc0f in MS Outlook?

FIX: Outlook error 0x800ccc0f in Windows

How to Fix Error Code 0x800ccc0f ?  Look no further this page is your solution. Below is a clear explanation and solution regarding error 0x800ccc0f. The intention of this page is to help Outlook (Express) users who are experiencing problems like error 0x800ccc0f.
Help us make more of these useful sites. Place a link to this website on your website.

Quick explanation / solution How to Fix Error Code 0x800ccc0f

I get the error 0x800CCC0F (0x800CCCOF) when I try to send or receive mail with Outlook.
# Send.
The server terminated the connection unexpectedly. Potential causes are issues with the server, organize issues or too long idleness
This message indicates a modem problem.
– check the modem and connections. Also disable all applications on the computer and try again (some modems use all the power of the computer’s CPU)

# Receive:
The computer contacts the mail server, but Outlook has difficulty processing one or more e-mails due to header errors. this usually concerns spam e-mail that has been mutilated.
Solution: Read the email using webmail and remove the culprit. Unlike Outlook, webmail is always able to process email regardless of the quality.

Microsoft explanation / solution
Symptoms & Fix Error Code 0x800ccc0f

When you try to send or receive an e-mail message in Outlook 2002, you receive an error message that resembles the following:

Error 0x800ccc0f: The connection to the server has been interrupted.

Cause

This problem can occur if your computer is running an email-protected antivirus program that checks email as it arrives from your Post Office Protocol (POP) server.

Solution

To resolve this issue, disable the email-protected antivirus, and then manually add the POP server name in the Outlook Accounts dialog box.
To physically include the POP server setting, follow these means:

1. Start Outlook.
2. On the Tools menu, click Email Accounts.
3. Snap View or change existing email records and snap Next.
4. In the E-mail Accounts discourse box, click Add .
5. Click POP3 and click Next.
6. Enter the appropriate information for your POP3 email server and click Next.
7. Click Finish.

Disclaimer: No rights and / or results can be derived from the above texts. Following and / or executing the above instructions is entirely at your own risk. If you are not experienced with installing and / or repairing software / software, we recommend that you hire someone with experience.or If you need any support or technical help than call our toll free Outlook Customer service phone number +1-917-580-5618 Here You Can get a certified outlook technician can help you to fix your issues online.